Adept Rocketry - Accessories - Miscellany

Seal holes and gaps in bulkheads and such with epoxy or removable putty. After passing wires through holes in bulkheads and such, seal them with epoxy, or removable putty such as Tac'N Stik.

An Altimeter must be installed in a "sealed" chamber with a vent or vents to the outside. A sealed bulkhead below the altimeter chamber is necessary to avoid the vacuum caused by the aft end of a rocket during flight. A sealed bulkhead above the altimeter chamber is necessary to avoid any pressure fluctuations that may be created at the nose end of the rocket.

Electronic Instrumentation is not compatible with the fumes and residue created by rocket motors and deployment charges.

Tac'N Stik per 2 ounce pack: $1.99

There are several similar products on the market that vary in brand and color, in packaging and texture, and so on. Click HERE to see a picture of the samples we have collected.

*

Shorting Jumpers are used to connect two connecter pins together in order to turn on the power for some of the Adept devices. (When controlling power with two connector pins a CAB2-xx series cable optionally may be used in most cases, to control power on and off remotely). Shorting Jumpers are also used on some devices to program certain values or functions.

Shorting Jumpers per pack of 10: $1.39

*

Copyright 1989-2008, All Rights Reserved. www.adeptrocketry.com 11-21-08